Built to be seen.
Purpose-built, sunlight-readable LCD monitors and touchscreens for indoor, semi-outdoor and full-outdoor use. Self-contained, with no secondary housing, and built to run maintenance-free.
LCD displays
In-Window LCD Monitor / Touchscreen
LXW
Indoor 10.4″ LCD Monitor
LXC-104
Indoor LCD Monitor / Touchscreen
LXM
Outdoor Bonded LCD Monitor
LXQ
Outdoor Bonded LCD Touchscreen
LXQ-T
Outdoor Half Cut LCD Monitor
LXH
Outdoor LCD Monitor / Touchscreen
LX
Outdoor LCD Monitor / Touchscreen
LXL
Reflective Display ChLCD
LXE
Semi Outdoor Half Cut LCD Monitor
LXH-S
Semi Outdoor LCD Monitor
LXS
Semi Outdoor LCD Touchscreen
LXS-T
Ultra-Thin Sliding-Window LCD
LX-UWEngineered to your requirements.
As an electronic manufacturer, we build each LCD monitor and touchscreen to your exact size, brightness and environment. Semi-custom changes are straightforward, up to full OEM and ODM builds, delivered cost-effectively.
FHD to 4K clarity
FHD, UHD and true 4K panels, sharp from across the room to up close.
Bright in any light
High-brightness panels from indoor to direct-sun, with automatic smart dimming.
Long service life
Minimum 50,000-hour panels, with up to 100,000 hours on select models, well beyond a typical commercial monitor.
Serviceable, not disposable
Field-serviceable and repairable with stocked spares, so damage doesn't mean replacing the whole display.
Controlled bill of materials
Components secured for at least five years, so the same model stays available and supportable far longer.
Optical bonding
Available on select models: bonded cover glass lifts contrast and prevents internal fogging and condensation.
Optional touch
PCAP or in-cell multi-touch, single or double-sided, plus anti-glare glass.
No secondary enclosure
Sealed on all sides with no exposed rear fans, filters or connections, so it installs on its own, even outdoors.
Secure cable management
Sealed cable glands rated up to IP67 and direct conduit entry, with tamper-resistant hardware.
Sealed & certified
Sealed up to IP66 and IK10 impact, CSA certified, with ADA/AODA options on select models.
Impact resistant, all sides
Built to take knocks from every side, not just the front glass, with conformal-coated, protected electronics.
Wide temperature range
High-TNI panels and active thermal design for reliable operation from -40°C to +50°C on specified builds.
Features and ratings are model and configuration dependent, and available on select builds. Rated operating range is -40°C to +50°C on specified builds. Contact us for conditions outside this range. CSA certified, with TAA-compliant and ADA/AODA configurations available. Contact us to learn about available or configured certifications for your project requirements.
Not all displays are built the same.
A finished display or kiosk can look nearly identical from the outside. The difference is behind the service door: the electrical architecture, thermal management, component selection, cable management, environmental protection and serviceability.
Adapted / general-purpose
- Plug-in power distribution
- General-purpose components
- Loose or bundled cabling
- Cooling added around existing hardware
- Multiple independent components assembled together
- Certification dependent on final configuration
- Generic enclosure
- Difficult field servicing
Common Pixels purpose-built
- Engineered internal power distribution
- Components selected for the operating environment
- Routed, secured and serviceable wiring
- Thermal system engineered around the complete assembly
- Integrated system architecture
- Designed around applicable certification requirements
- Enclosure engineered around the display and application
- Organized access and replaceable components
The difference isn't always visible on day one. It's revealed under real operating conditions.
Industrial-grade, not a repurposed monitor.
It comes down to grade, spec and support. Here is how an off-the-shelf monitor and a Common Pixels display compare.
An off-the-shelf or commercial monitor adapted for the job
- Off-the-shelf: fixed features you don't need, and gaps you can't fill
- Often rated from 30,000 to 50,000 hours at most, and typically not repairable
- Same model usually available a year or two, with few spare parts
- Rear fans, filters and connections are typically unprotected and usually need secondary housing
- Basic cable entry, sealed to about IP54 at best
Common Pixels
- Purpose-built to your spec, semi-custom or full OEM and ODM, cost-effectively
- 50,000 to 100,000-hour panels, field-serviceable with stocked spares
- Controlled bill of materials keeps the same model available for years
- Sealed on all sides, no rear fans or filters, so no secondary enclosure needed
- Secure cable glands up to IP67 or conduit entry, plus warranty and support
Spec an LCD display.
Tell us the size, brightness and environment. We’ll recommend the right build, or a form-fit-function replacement for what you have.